NL
DA-2002
Automatic
brake disc aligner
DA-2002
The DA-2002 is an automatic brake disc aligner offering additional ease of use thanks to its control panel. With multiple feed rates available, machining becomes easier and up to approximately 50% faster, without compromising the end result.
Thanks to its more compact design, this model is also suitable for vehicles with limited space in the rear axle wheel arch.
The DA-2002 comes complete with a disc lathe, drive unit, and all necessary accessories. The machine can also be upgraded with additional accessories, such as a radial adapter kit for vehicles with radially mounted brake calipers.
DL-2002
Disc Lathe
DU-2010
Drive Unit
Specifications
Disc Lathe DL-2002
| Specification | Value |
|---|---|
| Height | 210 mm |
| Width | 207 mm |
| Length | 249 mm |
| Length from mounting point | 204 mm |
| Weight | 7.7 kg |
| Disc run-out | <20 µm |
| Thickness variation | <20 µm |
| Surface roughness | <2 µm |
| Maximum brake disc thickness | 41 mm |
| Maximum cutting depth | 0.4 mm |
| Maximum brake disc diameter | No limit |
| Feed rates | 6, 9, 12, 18 mm/min |
Drive Unit DU-8610
| Specification | Value |
|---|---|
| Height | 1,420 mm |
| Width | 735 mm |
| Length | 830 mm |
| Working Height | 450-1,250 mm |
| Weight | 52 kg |
| Rotational speed | 80 - 160 rpm |
| Drive torque | 65 Nm |
| Maximum current | 11 A |
| Power | 0.55 kW |
Accurate and reliable
MAD’s brake disc aligners are designed with maximum precision, efficiency, and ease of use in mind. Our reliable systems allow machining of brake discs of passenger cars and light commercial vehicles directly on the vehicle.
The brake disc is machined directly on the mounted wheel hub, ensuring that the disc lathe is aligned with the brake disc. This prevents measurement errors caused by play, misalignment, or tolerances in the bearing and hub system.
Including storage box
The Disc Lathe along with its accessories is stored in a compact storage box.
Universally applicable
Using smart adapters, our brake disc aligners can be used on more than 99% of all passenger cars and light commercial vehicles.
The benefits of machining brake discs
- Ensures vibration-free braking comfort
- A durable solution that extends the service life of expensive components
- Sell the workshop’s expertise and labor hours
- Perfect alignment between the disc and the brake pads thanks to mounting at the caliper mounting points
- Universally applicable to more than 99% of passenger cars and light commercial vehicles
